The HemaJet-EO52 is used in the production of high quality bulky air-textured yarns such as polyester, nylon, polypropylene, and glass fibres.
HEBERLEIN. HEMAJET-EO52.
Features and Benefits.
Technical data.
Application
Type | N50/V180 | N70/V180 | N110/V220 | N180/V250 | |
---|---|---|---|---|---|
Total count of feed [dtex] | PES/PA PP | 156 … 500 --- | 500 … 1320 78 … 150 | 1300 … 2000 150 … 1300 | 2500 … 3500 1200 … 2500 |
Total count of final yarn [dtex] | PES/PA PP Glass | 300 … 850 --- | 850 … 1400 200 … 800 | 1400 … 3200 300 … 2500 … 1500 | 3200 … 6000 2000 … 5000 … 10000 |
Single filament count [dtex] | 1.5 … 5.5 | 1.5 … 5.5 | 2.2 … 7.0 | 3.0 … 10.0 | |
Yarn overfeed | Core Effect Single/parallel | 8 … 20 % 60 … 300 % < 30 % | 8 … 20 % 60 … 300 % < 30 % | 8 … 20 % 60 … 300 % < 30 % | 8 … 20 % 60 … 300 % < 30 % |
Winding speed [m/min] | 50 … 500 | 50 … 500 | 50 … 500 | 50 … 500 |
Air consumption
Type | Air channel diameter | Formula |
---|---|---|
N50/V180 | 2 x 1.4 mm | qvn = 1.20 x (pe + 1) |
N70/V180 | 2 x 1.4 mm | qvn = 1.20 x (pe + 1) |
N110/V220 | 2 x 1.6 mm | qvn = 1.95 x (pe + 1) |
N180/V250 | 2 x 2.0 mm | qvn = 2.55 x (pe + 1) |
Compressed air requirements
Overpressure | 6.0 … 14.0 bar |
For the compressed air quality requirements, see Compressed air purity.
Demands on the thread wetting system
Water delivery rate
Depending on the count, the following water delivery rates must be available per thread position for wetting the thread:
… 500 dtex | 0.8 … 1.5 l/h |
… 2000 dtex | 0.8 … 2.5 l/h |
… 5000 dtex | 1.5 … 3.5 l/h |
Water quality
In order to prevent damaging or scaling of the jets, the water of the thread wetting system must be filtered and softened.
-
Max. particle size: 1 μm
-
Water hardness: < 10° dH*
* (10° dH = 17.8° fH, 12.5° eH, 10° aH)
Request operating instructions.
Would you like to receive an operating manual for your product? Request now.